TW Acustic Raven AC Turntable : Photo Gallery 1 |
|
|
|
Note the platter, a compound design of a special polymer and the top part made of copper |
|
|
|
The TW Acustic Raven AC is a solid heavy mass design |
|
|
|
The armboards are made of bronze as standard, and can be customized per tonearm. For example, on the left is the SME V armboard, and on the right one for the Schroder dps tonearm. |
|
The spindle |
|
|
|
High torque DC motor. These motors come in different heights to suit various configurations. Furthermore, the Raven AC can be driven by 3 highly synchronous motors for absolute drive. |
|
The bearing, where the top part is polished in a semi-arc design. There are no ball bearings. A small bit of oil is simply sprayed on the bearing for lubrication. |
|
Underneath the platter. A small amount of oil is also sprayed into the bearing hole. |
|
The power supply, microprocessor controlled. Speed adjustment is so intuitive, just toggle the Up/Down switch. Speed adjustment settings can then be Saved/Stored. |
|
A customer's TW Acustic Raven AC turntable, with a Schroder dps and SME tonearm mountedClick on the photo to view more photos as well as the customer's system |
|
| << Back to TW Acustic Main Page |
|
|
|
TW Acustic Turntables
|
|
Copyright 2002 - 2006 Soundscape HiFi And Music Designed by E-SOUNDSCAPE
|
|
|